What are the classification of open level faucets

2020-11-03 11:47:37

The faucets in the kitchen and bathroom play a very important role. If water is needed, it is done by it. However, according to the raw materials and styles, there are various types of faucets. When purchasing, you need to choose according to your actual situation. How to choose the specific head of the water dragon? What are the most important aspects?


What are the classification of faucets


1. From the function point of view


(1) multifunctional bathtub faucet


The faucet used in the bathtub has two outlets, one is adjacent to the bathtub shower, the other is adjacent to the faucet under the shower for shower.


(2) multifunctional basin faucet


But where used in the toilet above all kinds of basins, the outlet water is shorter and lower, mainly used for washing, cleaning.


(3) multifunctional kitchen faucet


It is a special product for kitchen cleaning. It is usually connected with two pipes and can be supplied with hot and cold water. The water outlet is higher and the front end of the faucet is longer. Some even have a hose, which can be changed from multiple angles for washing.

开平水龙头

2. Differences in layout


(1) monopodies


This type of faucet products are common, but only with a single handle. It is characterized by flexible switch, long service life and convenient temperature control;


(2) dipodactyls


As the literal understanding, however, it is divided into two switch handles, and the water and water temperature are scheduled through the process scheduling switches on both sides. The fault fallacy is that it is not too convenient to use, the benefit is to be able to manually dispatch according to the demand of water volume and water temperature.


(3) faucet with 90 degree opening


Based on the traditional double handle, the ceramic chip is used for sealing, and the handle can be changed by 90 degrees when the faucet is opened and closed.


3. Distinguish from raw materials


(1) plastic faucet


Plastic faucet color rich, mold mass production, and relative to other raw materials, the use of safety is higher, the adoption of ABS plastic production and processing. But it's not strong. It's short-lived.


(2) stainless steel faucet


Stainless steel raw material faucet does not contain lead, and it is resistant to acid, alkali, corrosion and is not easy to release harmful substances. In comparison, it will not pollute the water source. Stainless steel faucets do not need electroplating, only need polishing to flash the essence of stainless steel.


(3) ceramic faucet


Compared with other faucets, ceramic faucets have the advantages of no rust, no oxidation and no easy wear. Ceramic faucet outside the elegant, because the shell is also ceramic products.


How to choose tap


1. Look at the appearance first. The main body of the faucet is made of brass, bronze (or copper alloy). After grinding and polishing, it is plated with chromium and other surface treatment. There are strict process requirements for the main body casting and surface treatment of regular products, and the neutral salt spray test shall be carried out without corrosion in the corresponding period. Therefore, the choice of the faucet should pay attention to its appearance.


2. Turn the handle quietly to check whether it is simple and flexible, and whether there is blockage and weight stagnation. It is better to switch seamless, easy and smooth faucet. The gap of inferior quality is large, and the sense of obstruction is great.


3. Tap the main body of the faucet to see if the sound is dull, and carefully observe whether the faucet interface is copper body. If the sound is clear and crisp, it may be stainless steel and other raw materials, which is worse. To see whether all parts of the faucet, especially the primary parts, are tightly assembled. The valve body and handle of a good faucet are made of brass, with heavy weight and dignified feeling.


4. Check all parts of the faucet and observe whether the assembly is tight and loose. Generally, the single handle mixing faucet is attached with device scale diagram and operation manual when leaving the factory. Before the device is used, the commodity package should be opened to check the certificate, so as to avoid the use of "three no" products.


Generally speaking, when installing faucets in a family, you need to choose the style and raw materials that are suitable for your own family. If you do not choose well, it will affect the application effect. Therefore, you should understand clearly before purchasing.


The article comes from the water tap http://www.kpsengle.com


Navigation Call About Product